Tow bar testing will be an essential part of the MOT tests from next year, VOSA regulations will come into force on the 1st January 2012 and all 13 pin tow bars on Classes 3, 4, 5 & 7 will need to be tested.<\/p>\n
aide automotive are stocking a 13-pin TowBar Tester to check the 13-pin electrical towing sockets fitted to vehicles with tow-bars. If the sockets are faulty, then trailer or caravan lights may not work.<\/p>\n
The device enables a single MOT Tester to test the 13 pin socket easily and quickly. The hand held casing has been designed to be light weight and tough, with rounded edges to prevent damage should it come into accidental contact with either the vehicle’s bodywork or interior, the display LED’s are bright enough to be seen even in direct sunlight and the lead is a generous 5m long with a rugged, moulded 13pin plug.<\/p>\n
Ergonomics and ease of use were a major consideration when the this tester was designed, the smaller thinner case makes the unit easier to hold, and the recessed self test button helps prevent accidental operation, the intuitive label graphic quickly guides the operator as to which light is being tested as it replicates the rear of a vehicle and the light position.<\/p>\n
Priced at \u00a349.99 + vat this tester is ideal for MOT Garages or Prep Garages to carry out the Tow Bar Socket Test.<\/p>\n