MV Trucks a MAN and Renault dealer in Aylesford Kent recently won a contract to maintan and repair a number of triales for a exisiting customer, with this MV trucks purchased a TrailerCheck 4 Vans for one of there mobile fitter vans.
MV Trucks David Henniker Stated “In this day and age buying specialist equipment is a big commitment for company’s, however when we realised that we needed this specialist trailer checking equipment we decided to look around for the best application. Having finalised the deal with aide automotive we were not disappointed, it was delivered quickly and fitted easily in our van. It’s easy to use and supplied with a full set of instructions, now we take the workshop to the trailer what could be more simple.”
TrailerCheck is an ideal cost effective test gauge to quickly determine the electrical integrity of an EBS/ABS braking system and a full lighting check on a commercial trailer.
Using a tractor unit to carry out a trailer test is not as effective as the TrailerCheck as the tractor unit is not guaranteed to be a 100% working unit. TrailerCheck eliminates the indecision and confirms the trailers fault. Additionally when servicing or prepping trailers there maybe no space to hook a tractor unit up
An intelligent unit, the TrailerCheck 4 Vans pulses the lighting circuits to conserve battery power and will not burn out short circuits. Powered on for 2 seconds and then off for 1, TrailerCheck has the capability to power multiple trailers without the inconvenience of continually recharging batteries. In diagnostic mode a single circuit can be powered for fault finding, TrailerCheck is also protected against short circuits, if so the micro processor will keep resetting with a back up fuse as protection.
Two air test gauges are incorporated within the TrailerCheck with a hand held remote brake activator and digital pressure gauge, one operator can be under a trailer activating brakes and reading pressures.
Switching brakes on and off allows the user to look for wear in s cams and faulty slack adjusters, activating the brakes while under the trailer operators are able to see all components working to identify faults and wear. The digital pressure gauge measures pressure at the brake chamber, ideal for setting load sensing valves.
EBS Trailers can be tested for CAN line integrity, a quick and simple test to confirm the CAN lines are OK or at fault.
If you require a Trailer Light Tester then conact aide automotive Ltd for options and prices, click on Trailer Light Tester to contact aide automotive ltd.
